wall_ring_mount
implemented exercised source: registry-only
base Creates the primary solid — a recipe starts with a base operation.
wall flange + fused C-ring tool saddle + gusset ribs (tool axis = X, prints upright)
Parameters
| parameter | type | default | range | role | |
|---|---|---|---|---|---|
tool_d | length | required | — | — | |
clearance | length | 1.0 | — | — | |
ring_wall | length | 7.0 | — | — | |
collar_h | length | 30.0 | — | — | |
capture_deg | number | 220.0 | — | — | |
standoff | length | required | — | — | |
flange_w | length | required | — | — | |
flange_h | length | required | — | — | |
flange_t | length | required | — | — | |
flange_corner_r | length | 6.0 | — | — | |
rib_t | length | 3.0 | — | — | |
tool_mass_kg | number | 2.5 | — | — | |
safety_factor | number | 2.5 | — | — |
Required checks
Every archetype using this operation must subscribe to:
form.tool_saddle_radius_okform.tool_clearance_okform.retention_angle_okform.mouth_gap_okform.ribs_connect_saddle_to_flangeform.anchor_wall_strength_unverifiedtopology.tool_void_opentopology.single_connected_solidtopology.ribs_present