inlet_cap_body
implemented exercised source: registry-only
base Creates the primary solid — a recipe starts with a base operation.
support-free Г-hook inlet cap (VF-9 Part B): vertical hose bore through a nose column dipping into the rail inlet channel; hooks the wall's outboard edge, docks on the +Y face; prints as-modeled with no floating cantilever
Parameters
| parameter | type | default | range | role | |
|---|---|---|---|---|---|
cap_w | length | 64.0 | — | — | |
cap_h | length | 22.0 | — | — | |
tube_od | length | 9.0 | — | — | |
bore_clearance | length | 0.4 | — | — | |
socket_depth | length | 12.0 | — | — | |
orifice_d | length | 5.0 | — | — | |
rail_wall_t | length | 13.25 | — | — | |
saddle_fit | length | 0.4 | — | — | |
saddle_depth | length | 8.0 | — | — | |
hang_drop | length | 16.5 | — | — | |
spout_w | length | 14.0 | — | — | |
rail_channel_w | length | 16.0 | — | — | |
corner_r | length | 3.0 | — | — | |
hook_reach | length | 3.5 | — | — | |
dock_magnets | bool | False | — | — | |
magnet_d | length | 6.0 | — | — | |
magnet_t | length | 2.0 | — | — | |
dock_fit_clearance | length | 0.2 | — | — | |
dock_x | length | 22.0 | — | — | |
dock_inset | length | 7.0 | — | — | |
dock_drop | length | 4.0 | — | — |
Required checks
Every archetype using this operation must subscribe to:
form.hose_bore_okform.spout_drop_path_okform.cap_water_path_visibleform.dock_pockets_dryform.no_standing_water_irmanufacturing.cap_supportless_verifiedtopology.fluid_path_opentopology.single_connected_solidtopology.cutout_presenttopology.ribs_present